The Biz Buzz

Get the most up-to-date news, insights and analysis of Tacoma, Pierce County and South Puget Sound business.

NOTICE: The Biz Buzz has moved.

With the launch of our new website, we've moved The Biz Buzz.
Visit the new section.

Bombardier crash landing has different cause

Post by John Gillie / The News Tribune on Oct. 31, 2007 at 5:59 am with No Comments »
October 31, 2007 5:59 am

Danish authorities have blamed the crash-landing of an SAS Bombardier Q400 aircraft Saturday in Copenhagen on a landing gear problem different from one that caused two earlier crashes.


Last weekend’s crash along with two similar SAS incidents in September caused SAS to remove the Q400 from its fleet permanently. See the crash video here.


Authorities say that a preliminary investigation shows the landing gear failure in the most recent crash was not caused by the corrosion of a bolt that led to the September crashes.


That report shows a rubber O-ring blocked an orifice in the landing gear preventing the gear from extending fully.


The twin-engine turboprop plane’s right landing gear never extended much beyond the wheelwell where it was stowed in flight, so when the plane landed, the aircraft tipped toward the right until the right wingtip struck the ground. No passengers or crew members were seriously injured.


Other airlines flying the Q400, including SeaTac’s Horizon Air,have kept their Q400s flying after the latest incident on the advice of the plane’s manufacturer. Horizon has 33 Q400s and 15 more on order.


The two previous incidents triggered a worldwide grounding of the aircraft while they underwent inspections.


Horizon canceled hundreds of flights but found no significant problems with its Q400s.

Leave a comment Comments
*
We welcome comments. Please keep them civil, short and to the point. ALL CAPS, spam, obscene, profane, abusive and off topic comments will be deleted. Repeat offenders will be blocked. Thanks for taking part and abiding by these simple rules.

JavaScript is required to post comments.

Follow the comments on this post with RSS 2.0